Panoramic Photography For Beginners – Part 3 – Panorama Photo Shooting Tips

Panoramic Photography For Beginners – Part 3 – Panorama Photo Shooting Tips

In this group of articles, we’re discovering how beginners can generate their own ultra wide angle panoramic images using the technique of stitched panoramic photography.

In the last two articles, we discovered just a little about different ways of creating panoramas, and the easy tools you have to create your own panoramas.

In this post I talk about seven simple secrets about how exactly to shoot your photos to give you the very best outcomes when you stitch them collectively into a panorama.

1. Strategy Your Shot Sequence

When shooting photos for a panorama, you’ll be taking from two up to twelve or even more photos in a sequence. It’s worth performing a ‘dry operate’ while searching through the viewfinder to strategy out beforehand how you are likely to arrange your shots.

2. Shoot From Remaining to Right

You can shoot your photo sequence in either path, but in the event that you shoot from left to right, it will be far easier to create sense of your photos if you are looking at them on your pc, and it’ll be easier to have them in the proper order in the software.

3. Overlap the Photos

Your photos must overlap to ensure that the software to stitch them collectively. You can effectively stitch your photos with an overlap of 20% or much less, but 30-50% overlap is preferred. A larger overlap offers you more area for great tuning your results.

In my own early attempts at capturing panoramas, this was among my biggest mistakes.

I simply didn’t allow more than enough overlap — sometimes less than 5%. And I was shooting with a comparatively wide angle 28mm lens.

With a broad angle lens, the images are more distorted at the extreme edges of the frame, making them harder to stitch together in the event that you only have a little area of overlap.

That which was worse, the zoom lens on my old SLR suffered from ‘vignetting’ in wide angles, which meant my photos had noticeable dark patches in the part. With a little overlap area, these dark patches arrive in the finished panorama. EASILY had allowed even more overlap, they might have been cropped out.

4. Turn the Surveillance camera Sideways

To improve your vertical field of view simply by 50%, have a tip from the experts and turn your camera sideways to shoot your photos in the ‘portrait’ placement. You will have to shoot even more frames to cover the same picture, but you’ll get much more vertical coverage.

5. Keep carefully the Camera Horizontal

As you rotate your camera, make an effort to keep it as near horizontal as possible — purpose the center of your viewfinder at the horizon series.

For some subjects you’ll be tempted to aim the camera up (for a skyscraper) or down (for a scenic canyon). In the event that you do that your finished panorama will end up being distorted. For high (or deep) subjects, be sure you turn your camera sideways to obtain a greater vertical angle of view.

6. Start the Grid Lines

Many cameras have a ‘grid lines’ feature which allows you to show a grid of horizontal and vertical lines in your viewfinder while shooting. Convert the grid lines to help you keep carefully the horizon level also to estimate your overlap between frames.

Every time you shoot a frame, remember an object that was within the grid line 1 / 3 of just how in from the edge of the frame. After that rotate your camera in order that object is currently on the advantage of the body. This will provide you with a 1 / 3 overlap, which is fantastic for stitching your panoramas.

7. Use a Tripod when you can

Using a tripod will provide you with the best benefits. You will be sure all of your photos are in the same plane and it’s really easier to keep every thing lined up. Be sure you ensure that your tripod is certainly level before you begin shooting. Many tripods include built-in bubble levels to greatly help with this job.

If you’re investing in a tripod, look for one which has two separate amounts, one for leveling from front to back, and one for leveling still left to right. They are more accurate compared to the kind which has a one ‘dome’ design bubble level. In the event that you curently have a tripod with out a level, you can purchase a small plastic material builder’s level from your own local hardware store at under $10 which will do the same work.

Within the next article in this series, I’ll offer you seven even more panoramic photo shooting tips, like the easiest way to shoot your photos unless you have a tripod, and a straightforward shooting technique that may prevent the universal problem of vertical banding in your panoramas.


Leave a Reply

Your email address will not be published. Required fields are marked *